Precautions, Notes – Panasonic RX-FT500 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Thank you

for purchasing

this unit.

For

optimurTi performance, follow

these

operating instructions carefully.

PRECAUTIONS

•If the set is not used for a long period of time or is

used only from an AC power source, remove all the
batteries to prevent potential damage due to possible
battery leakage.

•Avoid using or placing this unit near sources of heat. Do

not .leave it in an automobile exposed to direct sunlight for
a long time with the doors and windows closed as this may
deform the cabinet.

•Avoid cuts, scratches, or poor connections in the AC

power cord, as they may result in possible fire or electric
shock hazard. Also, excessive bending, pulling or splicing

of the cord should be avoided.

•Do not unplug the AC power cord by pulling on the cord.

To do so may cause premature failure or shock hazard.

•Do not operate the set on AC power in a bathroom, as a

potential shock hazard may result.

•When not in use, disconnect the AC power cord from the

AC power outlet.

Max. 40“C

CASSÉTTE TAPES

Use only good-quality tapes up to the length of C-90. Do not

use C-120 tapes with this unit because these tapes can
easily became broken or stretched it not used with extreme
care and may get tangled with the Capstan and Pressure
roller.

OK

Pencil

If the tape loosens, take up the

slack by turning the reel in the
proper directions.

Notes:

•Use normal type of cassette tapes only, if other

tapes are used, you may not obtain optimum

performance.

•Cassettes, both recorded and unrecorded, should

not be stored in locations with high temperature,
high humidity or direct sunlight Never place a

recorded cassette near a magnetic source, such as

a magnet or a TV set as this may affect tape
performance.

Do not handle, or pull the tape

out of the cassette.

-2 -

Advertising