Before requesting service, Power correction, Monitor correction – Panasonic PV-C1321A User Manual

Page 40: Vcr correction, Remote control correction, Miscellaneous correction

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before Requesting Service

Check the tollowing points once again if you are having trouble with your unit.

Power

Correction

No power...

• Completely insert Power Plug into an AC outlet.
• Set POWER button to ON .

Monitor

Correction

No picture or sound...

• Make sure your antenna system (TV or CABLE), is correctly set. (P. 7)
• Completely insert Power Plug into an AC outlet.
• Set POWER button to ON,

Poor picture with normal sound...

• Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP

TV menu. (P. 11)

Poor sound with normal picture...

• Adjust VOLUME control. (P. 10)

Poor TV reception...

• Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P. 11)

No color or poor color...

• Adjust TINT and COLOR controls in the SET UP TV menu. (P. 11)

Ghost (multiple) images...

• Install a directional antenna.

TV programs cannot be watched...

• Make sure the selected channel is in unit’s memory. (P. 36)

Channel cannot be selected...

• Only the channel begin recorded can be viewed on this unit.

VCR

Correction

TV program cannot be recorded...

• Make sure your antenna system (TV or CABLE), is correctly set. (P, 7)
• Make sure cassette record tab is intact. (P. 6)

Timer recording cannot be

performed...

• Check that clock is set to current time and date.

• Make sure DSS/CABLE box (if used) is left on and tuned to channel to be

recorded.

• Set recording Start/Stop time correctly. (P. 14, 15)
• Timer recording may not be performed or continued if a power interruption of

more than 1 minute occurs before or during a Timer recording even after
power is restored.

No playback picture, or the playback
picture is noisy or contains streaks...

• Adjust TRACKING control in either direction. (P, 12)
• Try Head Cleaning. (P. 37)

VCR cannot be controlled...

• Make sure VCR LOCK is set to off. (P. 30)

• Make sure unit is not in a Timer Record operation.

Remote Control

Correction

Unit cannot be controlled...

• Aim remote at remote sensor on unit (P. 47) so that signal is unobstructed.
• Inspect the remote batteries. (P. 6)

• Make sure VCR LOCK is set to off. (P. 30)
• Exposing unit remote sensor to direct fluorescent or outdoor light may cause

signal interference.

Miscellaneous

Correction

Video cassette cannot be inserted...

• Insert the cassette window side up; record tab facing you.

Video cassette cannot be removed...

• Completely insert Power Plug into an AC outlet.

Tape cannot be ejected or inserted...

• Try ejecting or inserting the tape again after turning POWER off, then back

on.

Video cassette ejects when a

recording is started, or the power is

turned off for timer recording...

• Make sure cassette record tab is intact. (P. 6)

In Stop mode, the VCR motor

(CYLINDER) continues to rotate...

• To enable Quick Play mechanism, the VCR cylinder wilt rotate for about 5

minutes. This reduces response time from Stop to Play mode and. from Play

to Rewind Search mode.

VCR cannot be controlled...

• Make sure VCR LOCK is set to off. (P. 30)

If you cannot resolve the problem, please call the Customer Satisfaction Center for product

assistance at 201-348-9090.
To locate an authorized servlcenter call toll free 1-800-211-PANA(7262.)

or send e-mail to : [email protected]

40

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Advertising