Dimensions, D im ensions – Panasonic DIGITAL MULTIMEDIA PROJECTOR PT-L501XU User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
*1 The “i" appearing after the resolution indicates an interlaced signal.
*2 The following symbols are used to indicate picture quality.
AA Maximum picture quality can be obtained.
A Signals are converted by the image processing circuit before picture
is projected
B Some loss of data occurs to make projection easier,
C Picture cannot be projected.
*3 Signals with “OK” in the Resizing column can be set using the RESIZING
command in the PICTURE menu. (Refer to page 32.)
D im ensions
<Units: mm {")>
CO
\jc
51
Advertising
This manual is related to the following products: