Awáchmei«assembly.t(^ls-on-board, Rvia, Attachmet – Panasonic MC-V5715 User Manual
Page 7: Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
?AWáCHMEI«ASSEMBLY.T(^ls-on-Board
■ . u .
A
CAUTION
DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as it can be damaged by the agitator as it revolves.
ATTACHMEt^
Dusting
Brush
—
Jjj*---------
Wands (2)
Raised
MJ.
Crevice
Tool
L
Wand ^ Tab
■^-rVia'
The attachments should be conveniently positioned on the side of the
cleaner for easy access. Assemble the hose arid attachments to the
cleaner as follows:
Place the hose in back of the handle on the hose holder. Attach the
wand to the hose by aligning the two (2) raised tabs on the wand
with the “J" slots in the hose. After guiding the tabs along the
grooves, twist to lock in place.
Place the wand in the front slot of the tool holder, twisting
and pushing down over the short hose to assure a good
connection.
Hose
Holder
Dusting
Brush
Store the other wand in the round rear slot of №e tool
holder. Insert the dusting brush Into the top of the wand
as shown.
Hose
Place the crevice tool into the rectangular rear slot of the tool
holder.
Refer to the illustration in the PARTS IDENTIFICATION section
for correct attachment storage.
Short
Hose
-----
Agitator
(Underneath)
- 7 -