To operate cleaner, On/off switch, Upright position – Panasonic MC-V7375 User Manual

Page 11: Caunon, Power cord

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TO OPERATE CLEANER

A

CAUnON

DO NOT use outlets above counters. Damage to items in the surrounding areas could

occur. Be sure the switch is in the off position while plugging the cord in.

POWER CORD

NOTE: To reduce the risk of electrical shock, this vacuum has a polarized plug, one blade is wider

than the other This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper

outlet. DO NOT CHANGE THE PLUG IN ANY WAY.

i'''- ■ ■■

ON/OFF SWITCH

1. Plug the power cord Into a 120V outlet.

2. To start the vacuum cleaner, push the
switch to the ON position.

3. To stop the vacuum cleaner, push the

switch to the OFF position.

"* ■■¡■¡ky'f'Q

...................

The handle may be low­
ered to any position

required. Just step on №e
handle release pedal
as indicated by the
illustration and
lower the handle

as desired.

1. Upright position

The handle locks in this posi
tion for storage. The
handle should always
be in an upright posi­
tion when the attach­
ments are used.

2.

Middle position

This position is for normal
cleaning.

3. Low position

This position
is used for
cleaning under
furniture.

-

11

-

Advertising