Panasonic MC-V7375 - Manual (Page 6)

TO ASSEMBLE CLEANER
A WARNING
Electricaf Shock Hazard.
DO NOT plug Into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or Injury,
irrA©MING^H^iÌB1DW®lUÌÌB6iSllEE
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for shipping
purposes. Please remove
the screw before insetting the
handle. Insert the handle as
shown in the illustration.
Make sure the ON/OFF
switch is fn the OFF
position before
instaiiing.
2. Insert the screw
that you have
removed. Be sure the
screw is tightened,
but not overtight­
ened.
3. There are two (2) recessed areas
located on the handle, as shown in
the illustration, designed to secure
the power cord during vac­
uuming.
P—™
Always push the power
cord down into these recessed
areas to help keep the power
cord from hanging near the
nozzle and being damaged
by the agitator.
4. Loosely wrap the power cord
around the quick release cord
hook and the lower cord retain­
er. Secure the plug head to
the cord by pushing the
power cord into the retainer
on the plug head.
Retainer
(Plug Head)
USING THE CORD HOOK 1
1. The upper cord hook has a
quick-release action. To
release the power cord, rotate
the hook downward and the
complete power cord will
drop off the hook tor imme­
diate use.
,Cord
^m^Hook
2. DO NOT unplug the
///^
power cord by pulling on the Ij //
cord. Grasp the plug
head and pull to unplug the
vacuum cleaner.
J
Return the hook to the
//1
upright position before.
/
/
attempting to rewind the
! !
j
^
\
cord. II
j
-
6
-