Seymour Midwest Snow Roof Rake, 4 Handles(PK90228) - Manual

Leaf
Debris
Mailing Address: Shipping Address:
P.O. Box 1674 2666 S. Country Club Rd.
Warsaw, IN 46581-1674 Warsaw, IN 46580
Tools Needed for Assembly:
- 7/16” wrench (two)
REPLACEMENT PARTS LIST
SA10100 Head – 24” aluminum SA20054 Handle - 57” smooth
SA20057 Handle – 42” bent SA20048 Handle - 48” fluted with splice
SA60067 Bolt Bag – 4 bolts, 4 loc nuts, 2 braces SA20052 Handle - 57” fluted with grip
96048 4’ Extension Handle (optional) SP50135 Grip – 4.5” black vinyl
Snow Roof Rake
Assembly Instructions
Parts Shipped with Unit:
- Head
- Bolt bag with braces
- 4 Handles (42” bent, 57” smooth, 48” fluted with splice,
57” fluted with grip)
Handle Assembly:
1. Insert smooth middle section of handle into bent lower handle until snap pin engages in
hole.
2. Insert fluted top section of handle into middle section of handle until snap pin engages in
hole.
Instructions for Optional Extension Handle:
1. Remove fluted section of handle with grip from rake.
2. Insert the end of fluted extension with splice into the smooth middle section of the rake
handle until the snap pin engages in hole.
3. Replace the fluted section of handle with grip into the end of the extension handle until
the snap pin engages in hole.
PK90228
01/21/15
WARNING: This product conducts electricity. Contact with electrical
wires or equipment can result in serious injury. Disconnect power
from roof and gutter tape before using this product.
Head Assembly:
1. Assemble the braces to the head using the two smallest 5/8” bolts and loc nuts.
2. Insert rib of rake head into slot on end of bent handle. Align holes and insert small
1-1/4” bolt.
3. Align braces with handle and insert longer 1-1/2” bolt. Use wrenches to tighten all
loc nuts, being careful NOT to over tighten, DO NOT crush handle! Over
tightening may result in crushing the handle, and will decrease the useful life of the
handle.
FULL WARRANTY
All Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
Phone: 8 44-SEYMOUR
FAX: 574-267-8508 ��
www. seymourmidwest.com