California Faucets Solima Roman Set and Handshower with Trim - Manual

7008_ii_140505.doc Pg 1
Solimar
™
7008 & 70.1
Roman Tub Set and Handshower with Trim
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure: 20 to 70 psi *†
Maximum Flow Rate: 15 gpm
* Operating pressures between hot and cold supplies should vary no more than 30 psi.
† If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING SPOUT
Tub/Deck recommended hole size shall be Ø1-1/4”
Apply Teflon ® tape (6) (not supplied) to threaded
portion of SPOUT (1) and securely tighten SHANK
(1a) to SPOUT (1)
Place O-RING (3) into BASE (2) and insert spout
SHANK (1a) though deck hole
From underside place WASHER (4) onto spout
SHANK (1a) and secure SPOUT (1) in place with
NUT (5)
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
Ш
1-1/4”