COP-USA CM260IR-IP - Manual (Page 11)

Page 7 2 Mega Pixel IP Camera User Manual
Select “Property” and then select internet protocol according to the actual situation (for
example: IPV4). Next, click “Property” button to set the network of the PC.
ʓ Open the IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
ʔ After downloading Active X control, the login dialog box will pop up.
ʕ Input the default username and password and then enter to view.
3.2
WAN
Take access the camera by the router or virtual server for example
ʒ Make sure the camera is well connected via LAN and then log in the camera via LAN and
go to the Config
ÆNetwork ConfigÆPort menu to set up the port number.