COP-USA CM260IR-IP - Manual (Page 16)

Page 12 2 Mega Pixel IP Camera User Manual
5
Remote Live Surveillance
Functions of remote configurations include: System Configuration, Video Configuration, PTZ
Configuration, Alarm Configuration, Network Configuration and Advanced Configuration.
You should firstly select the menu on the left, and then set the relative parameters. When one
user configures parameters of a certain device, other users can not set this device.
5.1
System Configuration
The “System configuration” includes three submenus: Basic Information, Date & Time and
SD card.
5.1.1
Basic Information
In the “Basic Information” interface, you can set up the device name and can also check the
relative information of the server.
Setting steps:
1. Clicking the “Config” icon will appear the menu list.
2. Clicking the “Basic Information” will pop up a window as shown below:
3. Input the name of the device in the “Device name” text box.
4. Press the “Save” button to save the settings.
Please refer to the following table for parameters and instructions of server basic
configuration.
Parameter Meaning
Software version The software of the device
Software build date The software build date of the device
Kernel version The kernel version of the device
Hardware version The hardware version of the device
Mac Address MAC address of device
Maximum number of user Support max 10 users to access
Device name Name of the device.