COP-USA CM260IR-IP - Manual (Page 17)

Page 13 2 Mega Pixel IP Camera User Manual
5.1.2
Date & Time Configuration
Setting steps:
1. Go to Config
ÆDate & Time menu as shown below.
2. Set time zone.
3. Enable DST mode as required.
4. Set time. You may set time manually or enable NTP.
5.1.3
SD Card
1. Go to “System Configuration”
Æ“SD Card” as shown below:
The first time you used the SD card, you should click “Format SD card”.
Click “Eject card” to stop writing data to SD card. Then the SD card can be ejected
safely.
)
5.2
Video Configuration
Camera Configuration includes five submenus: Camera Configuration, Video Stream, OSD
Config, Video Mask and ROI Config.
Note: Using of SD card function should be coordinated with motion or sensor
alarm. When alarm is triggered, the system will automatically snap picture and
save the picture into SD card.