COP-USA CM260IR-IP User Manual

Page 18

Advertising
background image

Page 14

2 Mega Pixel IP Camera User Manual

5.2.1

Camera Configuration

Setting steps:
1. Go to “Video Configuration”

Æ “Camera” interface as shown below.

2. You may adjust brightness, contrast, hue and saturation of the picture.
3. Select white balance mode.
4. Wide dynamic, sharpen, and denoise are adjustable.
5. You can also set day-night mode and enable the image mirror and image overturn function.
6. You may frequency and repair bad pixel.
7. Press the “Save” button to save the settings.

5.2.2

Video Stream

Go to “Video configuration”

Æ

“Video Stream” to see an interface as shown below.


Three video streams can be adjustable.

Resolution: The higher the resolution is, the clearer the image is.

Frame rate: The higher the frame rate is, the more fluency the video is. However, more
storage room will be taken up.

Bitrate type: Including CBR and VBR. CBR means that no matter how changeable the video
resources are, the compression bitrate keeps constant. This will not only facilitate the image

Advertising