COP-USA CM260IR-IP - Manual (Page 30)

Page 26 2 Mega Pixel IP Camera User Manual
5.5.8
Mail Setting
Go to “Network Configuration”
Æ “Mail Setting” interface.
1. From Email: Sender’s e-mail address.
2. User name and password: Sender’s user name and password.
3. Server address: SMTP name of sender.
4. Select the secure connection type at the Secure Connection pull down list according to user’
actual needs.
5. Receival email address list: Add email address into the list.
6. Receival email address: Receiver’s e-mail address.
7. After all parameters set up, you can click “Test your account settings”. If email sent
successful, a “Test Successful” window will pop up, if not, users can try other email addresses
or check the setting.
Notice: If you change the static IP into PPPoE and select mailbox, there will be an e-mail sent
to your mail box for notifying a new IP address.
5.5.9
FTP
Go to Network Configuration
ÆFTP interface as shown below.
1. Add: Click Add button to input FTP server’s server name, address, port number, user name,
password, and upload path, click OK to confirm the setting.
2. Modify: Click this button to change some information of the FTP server.
3. Delete: Select s certain FTP account and click this button to delete this account.
4. Test: Select a certain FTP account and click this button to test its valid or not.