COP-USA CM260IR-IP - Manual (Page 34)

Page 30 2 Mega Pixel IP Camera User Manual
5.6.4
Reboot Device
Go to Advanced configuration—Reboot device to see an interface as shown below.
Click “Reboot device” button to reboot the device.
5.6.5
Upgrade
Go to Advanced Configuration—Upgrade interface as shown below.
1. Click “Browse” button to select the save path of the upgrade file.
2. Click “Upgrade server firmware” button to start upgrading the application program.
3. The device will restart automatically.
4. After you successfully update the software, click “OK” button to close IE and then re-open
IE to connect IP-CAM.
Notice: You can’t disconnect to PC or close the IP-CAM during upgrade.