Canon FS 2710 - Manual (Page 63)

63
63
Procedure
Click on the [Film] menu and select [Exposure].
• The Exposure Setting dialog box will appear.
Adjust the exposure
Click the [OK] button.
Hint
• If you are using the 2700F and you turn off (uncheck) the Auto setting, the
Film Type setting must be set manually. The film type corresponds to the
maker and product name.
(p. 72)
2700F Film Type Settings
The colors used in the film base of negative films varies between manufacturers and
individual products. To adjust the exposure manually with the 2700F, you must specify
the film type to reproduce image colors correctly. This is not required for positive films
because the film base is not colored.
To select Auto, click the check box.
These settings can be adjusted
when Auto is not selected.
Slider
Drag the slider button to the
left or right.
Exposure Setting dialog box (for FS2710)