Cisco SERIES 7970 - Manual (Page 4)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phone 7970 Series
4-4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Make sure to lock options after you have made your changes.
Caution Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Editing Values, page 4-4
• Overview of Options Configurable from a Phone, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Editing Values
When you edit the value of an option setting, follow these guidelines:
• Use the keys on the keypad to enter numbers and letters.
• To enter letters using the keypad, use a corresponding number key. Press the
key one or more times to display a particular letter. For example, press the 2
key once for “a,” twice quickly for “b,” and three times quickly for “c.” After
you pause, the cursor automatically advances to allow you to enter the next
letter.
• To enter a period (for example, in an IP address), press the . (period) softkey
or press * on the keypad.
• Press the << softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.
• Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.