Cisco SERIES 7970 - Manual (Page 5)

4-5
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Overview of Options Configurable from a Phone
Note The Cisco Unified IP Phone provides several methods you can use to reset or
restore option settings, if necessary. For more information, see the
“Resetting or
Restoring the Cisco Unified IP Phone” section on page 9-16 .
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Overview of Options Configurable from a Phone, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Overview of Options Configurable from a Phone
The settings that you can change on a phone fall into several categories, as shown
in
Table 4-1 . For a detailed explanation of each setting and instructions for
changing them, see the “Network Configuration Menu” section on page 4-7 .
Note There are several options on the Network Configuration menu and on the Device
Configuration Menu that are for display only or that you can configure from
Cisco Unified CallManager. These options are also described in the
“Network
Configuration Menu” section on page 4-7 and the or the “Device Configuration
Menu” section on page 4-15 .
Table 4-1 Settings Configurable from the Phone
Category Description
Network Configuration
Menu Option
DHCP settings Dynamic Host Configuration Protocol (DHCP)
automatically assigns IP address to devices
when you connect them to the network. Cisco
Unified IP Phones enable DHCP by default. DHCP Enabled
DHCP Address Released