Document Outline

• INTRODUCTION
  • Welcome to the World of Cub Cadet Yanmar Tractor
• 1. SAFETY PRECAUTIONS
  • About This Manual
  • Safety Alert Symbol
  • Precautions Before Operating Your Tractor
  • Safe Practices for Operating Your Tractor
    • 1. Starting Your Tractor
    • 2. Working with Your Tractor
    • 3. Considerations for Safety of Children
  • Operating Your Tractor on Slopes
  • Traveling on a Road
  • Safe Practices for Parking Your Tractor
  • Operating the Power Take Off (PTO)
  • Using the 3-Point Hitch
  • Safety Frame (Roll-Over Protective Structure) (ROPS) Precautions
  • Safe Practices for Servicing Your Tractor
  • Understanding the Tractor Safety Decals
    • Safety-Alert Symbol
    • Care of DANGER, WARNING and CAUTION Decals
• 2. SERVICING THE TRACTOR
• 3. SPECIFICATIONS
  • Specifications Table
  • Traveling Speeds
• 4. IMPLEMENT CAPACITIES
• 5. NAMES AND FUNCTIONS OF COMPONENTS
  • Appearance
  • Operator Station Controls
  • Instrument Panel, Switches and Hand Controls
• 6. PRE-OPERATION CHECK
  • Pre-Operation Check
  • Precautions Before the Operation
  • Routine Check
  • Prevent damage to the Plastic Surfaces and Painted Surfaces
• 7. OPERATING THE ENGINE
  • Starting the Engine
    • Opening / Closing the Fuel Shut-Off Valve
    • Engaging the Parking Brake
    • Warming Up the Engine in Cold Weather
    • Checking the Lights on the Instrument Panel
  • Starting the Engine in Cold Weather
  • Shutting Down the Engine
  • Restarting a stalled Engine
• 8. OPERATING THE TRACTOR
  • Operating a New Tractor
    • 1. Do not run the tractor at full speed during the first 50 operating hours period
    • 2. Changing the lubricating oil for the new tractor
  • Raising and Lowering the Roll-Over Protective Structure (ROPS)
    • 1. Lowering (Folding Down) the Roll-Over Protective Structure (ROPS)
    • 2. Raising (Unfolding) the Roll-Over Protective Structure (ROPS)
  • Operation of the Tractor
    • Adjusting the Operator's Seat
    • Fastening the Retractable Seat Belt
    • Turn Signals
    • Headlights
    • Hazard Lights
    • Range Shift Lever
    • 4-Wheel Drive Lever
    • Throttle Control Lever
    • Drive Pedals
    • Engaging the Cruise Control
    • Disengaging the Cruise Control
  • Stopping Travel of the Tractor
    • Emergency Stop Procedure
  • Parking the Tractor
    • Engaging the Parking Brake
    • Disengaging the parking brake.
  • Safe Practices for Operation
    • 1. Differential Lock
    • Engaging the Differential Lock
    • Disengaging the Differential Lock
    • 2. Safely Driving the Tractor on Roads
    • 3. Pushing or Towing the Tractor
    • 4. Transporting the Tractor on a Trailer
    • 5. Operating on Slopes
    • Uphill / Downhill
    • Steep Downhill
    • 6. About the Power Steering
• 9. POWER TAKE OFF (PTO)
  • Operating the Power Take Off (PTO)
    • Engaging the Power Take Off (PTO) (when the operator is seated on the operator's seat)
    • Disengaging the Power Take Off (PTO) (when the operator is seated on the operator's seat)
  • Installing an Implement to the Power Take Off (PTO) Drivelines
  • Using the Power Take Off (PTO) while the Tractor is Parked (when the operator is not seated on the operator's seat)
• 10. 3-POINT HITCH AND DRAWBAR
  • 3-Point Hitch
    • 1. Prepare the Implement Being Mounted
    • 2. Using the 3-Point Hitch
    • Adjusting the Right Lift Link
    • Top Link
    • Sway Links
  • Drawbar
    • Maximum Allowable Load on the Drawbar
    • Adjusting the Drawbar
  • Using the Safety Chain
• 11. HYDRAULIC SYSTEM
  • 3-Point Hitch Control System
    • Operating the 3-Point Hitch Control Lever to Raise or Lower the 3-Point Hitch
    • Hydraulic Flow Control / Stop Knob
  • Controlling the Implement Control Valve
    • Implement Control Lever
    • 1. Using the Hydraulic Lock Lever
    • 2. Regenerative System
    • Using the Implement Control Valve Regenerative Circuit
    • 3. Connecting the Implement Hydraulic Hoses
• 12. TIRES, WHEELS AND BALLAST
  • Tires
  • Wheel Adjustment
    • Checking the Wheel Bolt Tightening Torque
    • Tread Centerline Width
    • Adjusting the Rear Tread
  • Ballast
    • Front Ballast
    • Maximum Weight
    • Using Liquid Weight for the Tires
• 13. MAINTENANCE
  • Maintenance Check List
  • Lubricants
  • Replacement Parts
    • 1. Technical Document
    • 2. Parts
• 14. PERIODIC SERVICE
  • n Warranty and Repair of the Engine
  • Opening / Closing the Hood and Side Panels
    • 1. Opening / Closing the Hood
    • Opening the Hood
    • Closing the Hood
    • 2. Opening / Closing the Side Panels
  • Daily Checks
    • Checking the Engine Oil Level
    • Inspecting the Transmission Oil Level
    • Checking the Wheel Bolt Tightening Torque
    • Checking and Adjusting the Brake
    • Checking and Adjusting the Clutch
    • Checking the Radiator Hoses and Clamps
    • Checking the Tire Air Pressure
    • Cleaning the Radiator Cooling Screen, Cooling Fins and Oil Cooler Pipe
    • 1. Cleaning the Radiator Cooling Screen
    • 2. Cleaning the Radiator Cooling Fins
    • Cleaning the Grille and Side Screens
    • Checking the Fuel line
    • Checking the Power Steering line
    • Checking the Seat Belt and Roll-Over Protective Structure (ROPS)
    • Checking the Headlights, Hazard Lights, etc.
    • Checking the Cooling System
    • Refilling the Fuel Tank
    • Inspection Procedure for Safety Interlock System
    • 1. Range Shift Lever Neutral Switch
    • 2. Mid-Power Take Off (PTO) Engagement Lever Switch (option)
    • 3. Rear Power Take Off (PTO) Engagement Lever Switch
    • 4. Seat Safety Switch
    • 5. Checking the Operation of the Seat Safety Switch
  • First 50 Hours
    • Change the Engine Oil
    • Replacing the Engine Oil Filter
    • Replacing the Transmission Oil Filter
    • Changing the Transmission Oil
    • Cleaning the Transmission Strainer
  • Every 50 Hours
    • Checking the Front Axle Oil Level
    • Grease Specifications
    • 1. Lubricating Grease Fittings on the Tractor
    • 2. Lubricating the Hydraulic Implement Control Valve Linkage
    • 3. Lubricating the Seat Slide Rails
    • 4. Lubricating the 3-Point Hitch
    • Servicing the Fan and Alternator Belt
    • 1. Checking the Belt Tension
    • 2. Adjusting the Belt Tension
    • 3. Replacing the Belt
    • Checking the Fuel / Water Separator
    • Checking the Battery Condition
  • Every 100 Hours
    • Servicing the Air Filter Element
    • 1. Servicing the Primary Air Filter Element
    • 2. Servicing the Secondary Air Filter Element
    • Cleaning the Fuel / Water Separator and Replacing the Fuel Filter
  • Every 200 Hours
    • Engine Oil
    • Changing the Engine Oil and Filter
    • Inspecting and Adjusting the Toe-in
    • Checking the Air Intake Hoses and Clamps
  • Every 300 Hours
    • Transmission Oil
    • Changing the Transmission Oil and Filter, Cleaning the Transmission Oil Strainer
  • Every 500 Hours
    • Front Axle Case Oil
    • Changing the Front Axle Case Oil
    • Replacing the Fuel Filter
  • Every 1000 Hours
    • Servicing the Cooling System
    • 1. Draining the Cooling System
    • 2. Flushing the Cooling System
    • 3. Filling the Cooling System
    • Recommended Engine Coolant
    • Adjusting the Engine Valve Clearance
    • Checking the Fuel Injection Nozzle
    • Checking the Fuel Injection Pump
  • General Maintenance
    • Selecting the Rotational Direction of Front Tires
    • Changing Wheel Spacing and Tread Width
• 15. SERVICING THE ELECTRICAL SYSTEM
  • Battery
    • Special Note for the Battery
    • Servicing the Battery Safely
    • Inspecting the Battery
    • Removing and Installing the Battery
    • 1. Removing the Battery
    • 2. Installing the Battery
    • Cleaning the Battery and Terminals
    • Using a Booster Battery
  • Fuses
    • Replacing the Accessory Fuses
    • Checking the Alternator Fuse and the Main Fuse
  • Bulb
    • Replacing the Headlight Bulb
    • Replacing the Tail Light Bulb
    • Replacing the Turn Signal / Hazard Lights Bulb
    • Replacing the Instrument Panel Light Bulb
  • Headlights
    • Adjusting the Headlights
• 16. STORAGE
  • Safe Practices for Storage
    • 1. Preparing the Machine for Storage
    • 2. Preparing the Fuel and Engine for Storage
    • Fuel
    • Engine
  • Preparing the Stored Tractor for Operation
• 17. TROUBLESHOOTING
  • How to Use the Troubleshooting Table
    • 1. Engine
    • 2. Machine
    • 3. Brake
    • 4. Steering
• 18. INDEX