Cub Cadet 7532 - Manual (Page 16)

1 Introduction
10
1.6 Standard Maintenance
Handling Vehicle in Work Area
Take cautions for following items at handling vehicle in work area.
• Brake the parking brake so that the vehicle will not move forward and backward. Also, make a whirl-stop on
slopes.
• Provide sufficient ventilation equipment for discharging the exhaust gas or exhaust duct when activating the
engine.
• Secure sufficient space for work when removing the tire by jacking up the vehicle.
Battery Disconnection
When disconnecting the battery negative cable, make
sure to stop the engine and insulate the battery positive
cable. (Such as covering with appropriate cloth.)
If the below procedures are required for vehicle repair,
make sure to disconnect the battery.
• Jack-up of vehicle
• Engine work
• Work under body
• Installation/removal of electrical equipment
Reconnection of Battery
Before reconnecting the battery, make sure that all the electrical system is off in order to prevent the generation of
sparks and to protect the high sensitivity electrical equipment from the damage.
When reconnecting the battery, make sure to reconnect the battery terminal positive first after confirming that the
electrical contact is satisfactory and the battery terminal is well fixed.
Connection of Booster Cable to Battery Down
WARNING
Battery on charge may generate explosive hydrogen gas. Take caution not to generate sparks
and cover the vent plug or cover with moistened cloth accordingly.
WARNING
When connecting the booster cable while
generating hydrogen gas immediately after the
battery charge is complete, the electric arc may
generate and explode. Cover the vent plug or
cover with moistened cloth.
GS7W1-001
GS7W1-002