1 wire, 2 battery, 3 coupler – Cub Cadet 7532 User Manual

Page 22: 2cautionary items at operation 16

Advertising
background image

2

Cautionary Items at Operation

16

2.2.1

Wire

1. Tighten the wiring terminal securely.

2. Repair or change the damaged or deteriorated wire

immediately.

3. Clamp securely and take caution not to damage the

wire by clamping.

4. Take caution not to have the wire contact with

dangerous part (rotating equipment, exhaust box,
and corner with acute angle, etc.).

5. Set the grommet securely and take caution not to

damage the wire.

6. Clamp the wire with no slack, twist, or forced

pulling. However, it may require some slacks in
moving part.

7. Take caution not to pinch the wire when installing

the parts.

8. Connect the battery only after rechecking the

terminal protection or clamp condition, etc. after
wiring.

9. Use the fuse with specified capacity. It is strictly

prohibited to substitute the metal wire or copper
wire for the fuse.

2.2.2

Battery

1. Do not install the battery with capacity other than

specified (Ah).

2. Apply some grease to the battery terminal after

connecting the cable and cover with terminal cover.

3. Take caution not to accumulate the refuse or dust on

the battery.

4. Remove the battery from the vehicle when charging

the battery.

2.2.3

Coupler

1. When disconnecting the coupler and plug terminal,

take caution not to pull the harness.

2. Press the lock and pull to disconnect the CN

coupler and PA coupler.

GS7W1-006

GS7W1-007

(CN Coupler) (PA Coupler)

Lock

Male terminal side

Female terminal side

Advertising
This manual is related to the following products: