Cub Cadet 7532 - Manual (Page 48)

1 Maintenance Standard
8
1.3 List of Torque
Unit : (N•m {kgf•cm, lbf•ft})
Tightened Parts Torque
Double nut for engine control lever 0.78 to 0.98 {8 to 10, 0.58 to 0.72}
Mounting bolt for front axle bracket
(Engine left/right)
93.2 to 108 {950 to 1100, 68.7 to 79.6}
(Engine forepart)
118 to 132 {1200 to 1350, 86.8 to 97.6}
Drain plug for front axle case 20.6 to 29.4 {210 to 300, 15.2 to 21.7}
Air plug for front axle 11.8 to 16.7 {120 to 170, 8.68 to 12.3}
Drain plug front axle 11.8 to 16.7 {120 to 170, 8.68 to 12.3}
Drain plug for front axle center case 39.2 to 49.0 {400 to 500, 28.9 to 36.2}
Mounting bolt for kingpin case 58.8 to 68.6 {600 to 700, 43.4 to 50.6}
Mounting bolt for front axle center case 49 to 58.8 {500 to 600, 36.2 to 43.4}
Locking bolt for tie rod
Temp. tightening : 147 to 167
{1500 to 1700, 108 to 123}
Tightening : 9.8 {100, 7.23}
Locking nut for tie rod end
Temp. tightening : 44.1 to 53.9
{450 to 550, 32.5 to 39.8}
Tightening : 9.8 {100, 7.23}
Lock nut for tie rod end (Toe-in adjustment) 147 to 167 {1500 to 1700, 108 to 123}
Power steering hose 29.4 to 39.2 {300 to 400, 21.7 to 28.9}
Mounting joint for power steering 24.5 to 29.4 {250 to 300, 18.1 to 21.7}
Steering unit joint 24.5 to 29.4 {250 to 300, 18.1 to 21.7}