3 removal and disassembly of transmission, Removal and disassembly of transmission – Cub Cadet 7532 User Manual

Page 99

Advertising
background image

Transmission

5

58

5.3

Removal and Disassembly of
Transmission

Follow the following procedure for removal and
disassembly of transmission.

1. Remove the 3-point link.

1) Remove the snap pin at rear axle housing and

disconnect the stabilizers.

2) Remove the linchpin from lift arm and

disconnect it lift rods LH/RM from lift arm.

3) Remove the linchpin at the mounting point of

lower link and remove 3-point link.

4) Remove the snap pin at top link bracket and

remove clevis pin and top link.

2. Remove the harness and link.

• Rear PTO link

• MID PTO link (Option)

• Range shift link

3. Remove the mounting bolts (9 pieces) for hydraulic

case.

4. Remove the hydraulic case assembly by hoisting.

Lift rod

Stabilizer

Stabilizer

Top link

Lift arm

Lower link

GZ3W24-007

MID PTO link

GZ3W24-009

Range shift link

Rear PTO link

Hydraulic case assembly

GZ3W24-010

Advertising
This manual is related to the following products: