Cisco OL-21636-01 User Manual

Page 204

Advertising
background image

9-12

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Chapter 9 Creating a VPLS Policy

Defining an MPLS/EMS (EP-LAN) Policy with a CE

Perform the following steps.

Step 1

Click Next. The window in

Figure 9-11

appears.

The Editable check box gives you the option of making a field editable. If you check the Editable check
box, the service operator who is using this VPLS policy can modify the editable parameter during VPLS
service request creation.

Figure 9-11

MPLS/EMS (EP-LAN) with a CE Policy Attributes

Step 2

Choose an Interface Type from the drop-down list.

You can choose a particular interface on a CE, N-PE, U-PE, or PE-AGG interface based on the service
provider’s POP design. The interfaces are:

ANY (Any interface can be chosen.)

Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)

Ethernet

FastEthernet

GE-WAN

GigabitEthernet

TenGigabitEthernet

TenGigE

Advertising