Cisco OL-21636-01 - Manual (Page 210)

9-18
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 9 Creating a VPLS Policy
Defining an MPLS/EMS (EP-LAN) Policy without a CE
Figure 9-16 MPLS/EMS (EP-LAN) without a CE Policy Attributes
Step 2 Choose an Interface Type from the drop-down list.
You can choose a particular interface on a N-PE, U-PE, or PE-AGG interface based on the service
provider’s POP design. The interfaces are:
• ANY (Any interface can be chosen.)
• Port-Channel (A bundle of ports that share the same characteristics—this gives the service provider
the ability to aggregate bandwidth and protection.)
• Ethernet
• FastEthernet
• GE-WAN
• GigabitEthernet
• TenGigabitEthernet
• TenGigE
The value defined here functions as a filter to restrict the interface types an operator can see during VPLS
service request creation. If defined as ANY, the operator can see all interface types.
Step 3 Check the Standard UNI Port check box to enable port security.
This is the default. When you uncheck the check box, the port is treated as an uplink with no security
features, and the window dynamically changes to eliminate items related to port security.