Cisco OL-21636-01 - Manual (Page 263)

11-13
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 11 Deploying, Monitoring, and Auditing Service Requests
Auditing Service Requests
Step 1 Choose Service Inventory > Inventory and Connection Manager > Service Requests.
The Service Requests window appears.
Step 2 Choose an service request for the configuration audit.
Step 3 Click Details.
The Service Request Details window appears.
Step 4 Click Audit.
Step 5 Click Config.
The Service Request Audit window appears. Figure 11-13 shows an example of a successful
configuration audit.
Figure 11-13 Service Request Audit Report—Successful
This window lists the device name and role, and a message regarding the status of your configuration
audit.
If the audit is unsuccessful, the message field lists details on the failed audit. Figure 11-14 shows an
example of a failed audit message for an service request.
Figure 11-14 Service Request Audit Report—Failed
The audit failure message indicates missing commands and configuration issues. Carefully review the
information in the message field. If the audit fails, you must correct all errors and redeploy the service
request.
Step 6 Click OK to return to the Service Request Details window.