Domain, no pseudowire on svi), Flexuni/evc (pseudowire core connectivity – Cisco OL-21636-01 User Manual

Page 318

Advertising
background image

A-40

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Appendix A Sample Configlets

FlexUNI/EVC (Pseudowire Core Connectivity, no Bridge Domain, no Pseudowire on SVI)

FlexUNI/EVC (Pseudowire Core Connectivity, no Bridge Domain,
no Pseudowire on SVI)

Configuration

FlexUNI(EVC)/Metro Ethernet.

Feature: FlexUNI/EVC with pseudowire core connectivity, bridge domain disables, and with
Pseudowire on SVI disabled on the N-PE.

Device configuration:

The N-PE is a Cisco 7600 with IOS 12.2(33) SRB3.

Interface(s): GigabitEthernet7/0/0.

The U-PE is a Cisco 3750ME with IOS 12.2(25) EY2.

Interface(s): FastEthernet1/0/10.

Configlets

Comments

None.

U-PE

N-PE

vlan 545

exit

!

interface FastEthernet1/0/10

no ip address

switchport trunk allowed vlan add 545

!

interface FastEthernet1/0/12

no spanning-tree bpdufilter enable

switchport

no keepalive

no ip address

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk allowed vlan 545

switchport nonegotiate

mac access-group ISC-FastEthernet1/0/12 in

ethernet evc Customer1_248

!

interface GigabitEthernet7/0/0

service instance 2 ethernet Customer1_248

encapsulation dot1q 545

rewrite ingress tag pop 1 symmetric

xconnect 22.22.22.22 52498 encapsulation

mpls

backup peer 22.22.22.22 52499

Advertising