Flexuni/evc (autopick service instance name) – Cisco OL-21636-01 User Manual

Page 319

Advertising
background image

A-41

Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0

OL-21636-01

Appendix A Sample Configlets

FlexUNI/EVC (AutoPick Service Instance Name)

FlexUNI/EVC (AutoPick Service Instance Name)

Configuration

FlexUNI(EVC)/Metro Ethernet.

Feature: FlexUNI/EVC with AutoPick Service Instance Name enabled and the Service Instance
Name input field left blank.

Device configuration:

The N-PE is a Cisco 7600 with IOS 12.2(33) SRB3.

Interface(s): GigabitEthernet7/0/2.

The U-PE is a Cisco 3750ME with IOS 12.2(25) EY2.

Interface(s): FastEthernet1/0/14.

Configlets

Comments

The transport type is pseudowire.

The autopick Service Instance Name will take the value CustomerName_JobID.

U-PE

N-PE

!

vlan 452

exit

!

interface FastEthernet1/0/10

no ip address

switchport trunk allowed vlan add 452

!

interface FastEthernet1/0/13

no spanning-tree bpdufilter enable

switchport

no keepalive

no ip address

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk allowed vlan 452

switchport nonegotiate

mac access-group ISC-FastEthernet1/0/13 in

!

vlan 3524

exit

!

ethernet evc C1_1

!

interface GigabitEthernet7/0/0

service instance 3 ethernet C1_1

encapsulation dot1q 452

rewrite ingress tag pop 1 symmetric

bridge-domain 3524 split-horizon

!

interface Vlan3524

no ip address

description BD=T,SVI=T,Flex

xconnect 22.22.22.22 52500 encapsulation

mpls

backup peer 22.22.22.22 52501

no shutdown

Advertising