Cisco OL-21636-01 - Manual (Page 246)

10-10
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 10 Managing a VPLS Service Request
Modifying the VPLS Service Request
Note For information on the Bridge Domain ID attribute, which shows up in some VPLS service request
scenarios, see
Modifying the VPLS Service Request, page 10-10 .
Step 16 Continue to specify additional PEs, as in previous steps, if desired.
Step 17 Click Save.
The VPLS service request is created and saved into ISC.
Modifying the VPLS Service Request
You can modify a VPLS service request if you must change or modify the VPLS links. This is also where
you can associate templates and data files to a link.
Perform the following steps.
Step 1 Choose Service Inventory > Inventory and Connection Manager > Service Requests. (See
Figure 10-13 .)
Figure 10-13 VPLS Service Activation
Step 2 Check a check box for a service request.
Step 3 Click Edit.
The VPLS Link Editor window appears. (See Figure 10-14 .)