Cisco OL-21636-01 - Manual (Page 276)

13-10
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 13 Generating L2 and VPLS Reports
L2 and VPLS Reports
VPLS PE Service Report
The VPLS PE Service report allows you to choose PEs and display their roles (for example, N-PE, U-PE
or PE-AGG) and the VPLS services that are running on them.
Click the VPLS PE Service Report icon to bring up the window for this report. (See Figure 13-6 .)
Figure 13-6 VPLS PE Service Report
Filter Values:
• PE Role—PE device role (N-PE, U-PE, or PE-AGG).
• PE Name—PE device name.
Output Values:
• PE Role—PE device role (N-PE, U-PE, or PE-AGG).
• PE Name—PE device name.
• SR ID—Service request identification number.
• SR Job ID—Service request job identification number.
• Service Type—Type of service.
• SR State—Service request state.
Note The SR State output does not list service requests in the CLOSED state. Service requests in
other states are listed, as determined by the filter values.