Rpr configuration window—detailed description, Configuration tab – Cisco 12000/10700 V3.1.1 User Manual

Page 153

Advertising
background image

4-39

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 4 Managing Chassis

RPR Configuration

Figure 4-19 RPR Configuration Window

Step 2

Choose a Chassis from the list displayed at the left side of the window. For further information on the
fields displayed in this window, see

RPR Configuration Window—Detailed Description

for further

details.

RPR Configuration Window—Detailed Description

The RPR Configuration window displays two tabs: Configuration and Switch Over

Configuration Tab

Redundancy Mode—Displays and sets the redundancy mode of the selected chassis. The redundancy
mode can be RPR, RPR- Plus or SSO

Note

If the mode of the RP changes, then the standby RP is reloaded.

Preferred RP—Displays and sets the value (either “Active Slot No” or “Standby Slot No”) that
determines the active RP on the next reload.

Advertising