Udp status, Viewing the udp status window – Cisco 12000/10700 V3.1.1 User Manual

Page 162

Advertising
background image

4-48

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 4 Managing Chassis

UDP Status

UDP Status

UDP is a connectionless, unacknowledged, and unreliable protocol that is defined at the Transport layer
of the OSI reference model. Although UDP is responsible for transmitting messages, no software
checking for segment delivery is provided at this layer. UDP depends on upper-layer protocols for
verification.

The UDP Status dialog provides general details of all UDP connections established on the device. The
dialog is also updated whenever a new UDP connection is established on the device. The network
engineer can view the existing UDP connection and use the information to debug the problems in the
network.

The UDP connections can be viewed using the following commands:

show ip traffic

show ip sockets

The Cisco 12000/10720 Router Manager uses the UDP-MIB to populate the UDP Status dialog fields.

The UDP Status section covers the following areas:

Viewing the UDP Status Window

UDP Status Window—Detailed Description

Viewing the UDP Status Window

To view the UDP Status window for a chassis, proceed as follows:

Step 1

Right click on the chassis object and select the Cisco 12000/10720 Manager>Fault>UDP Status
option. See

Table 4-1 on page 4-2

for information on which objects allow you to launch the UDP Status

window.

Advertising