Configuring an ethernet interface – Cisco 12000/10700 V3.1.1 User Manual

Page 213

Advertising
background image

8-11

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 8 Interface Configuration

Ethernet Interface Configuration

Configuring an Ethernet Interface

To configure an Ethernet Interface, follow these steps:

Step 1

Open the Ethernet Interface Configuration window. See

“Viewing the Ethernet Interface Configuration

Window” section on page 8-10

for further details.

Step 2

Choose a Chassis, Module, and Ethernet Interface from the lists displayed at the left of the window.

Step 3

Edit the parameters displayed in the Configuration tab, as required. See

“Ethernet Interface

Configuration Window—Detailed Description” section on page 8-12

for further details.

Step 4

Choose the HSRP Parameters tab.

Step 5

Choose Edit > Apply Profile and then select the profile you wish to apply from the list displayed (if you
are applying a profile). When a profile is applied, the attributes applied from the profile appear in blue.

Figure 8-4

Ethernet Interface Configuration Window—HSRP Parameters Tab

Advertising