Deleting an existing tofab policy – Cisco 12000/10700 V3.1.1 User Manual
Page 320
11-34
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
WRED ToFab Configuration
Step 3
Modify the parameters in the ToFab Configuration tab, as required. See
Configuration Window—Detailed Description
for further details.
Step 4
Click Save to save the changes.
Deleting an Existing ToFab policy
A ToFab policy can be deleted only if it is not currently associated to any line cards. If a policy is
associated to a line card, it cannot be deleted unless it is disassociated from the line card.
To delete an existing ToFab policy, proceed as follows:
Step 1
Launch the Map Viewer, and choose the Layer3QoSView. Right click on the WRED-MDRR object and
choose Cisco 12000/10720 Manager>Configuration>ToFab>ToFab Configuration to launch the
WRED ToFab Configuration window. Refer
for information on different objects
that allow you to launch the WRED ToFab Configuration window.
Step 2
Choose the appropriate ToFab policy from the list displayed at the left side of the window.
Step 3
Choose Deployment>Delete Objects. The Deployment Wizard appears with a summary of what will be
deleted.
Figure 11-15 Deployment Wizard—Summary