Cisco 12000/10700 V3.1.1 - Manual (Page 444)

14-54
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
OSPF Status
Configure Network—Detailed Description
The Configure Network window displays a single area: Configure Network.
Configure Network
Process ID—The OSPF process ID of the selected chassis.
Network Number—The Network Number for corresponding Process ID of the selected chassis.
Network Mask—The Network Mask for corresponding Process ID of the selected chassis.
Area ID—The Area ID for corresponding Process ID of the selected chassis.
OSPF Status
The OSPF Status window displays the OSPF configurations for a device. The OSPF Status section covers
the following:
• Viewing the OSPF Status Window
• OSPF Status—Detailed Description
Viewing the OSPF Status Window
To view the OSPF status window for a chassis, proceed as follows:
Step 1 Right click on the chassis and choose Fault>OSPF>OSPF Status. See Table 14-1 on page 14-2 for
information on which objects allow you to launch the OSPF Status window. The OSPF Status window
appears with the General Group tab displayed. The General tab displays the attributes that apply globally
to the OSPF processes configured on the router.