Viewing atm physical port configurations – Cisco 12000/10700 V3.1.1 User Manual
Page 578
21-6
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 21 Troubleshooting and FAQs
Configuration
Viewing ATM Physical Port Configurations?
Q.
How do I view the ATM physical port configurations? It looks like ATM Configuration GUIs are for
configurations only.
A.
To view what is configured in the ATM physical port, use all the configuration windows provided
by the Cisco 12000/10720 Router Manager. For IP (Layer3) information use the IP Configuration
Window. For Interface Status: Use the Interface Configuration window, etc.
Configuration windows are technology-specific. For example, an ATM interface supports three
configurable technologies: Generic, ATM, and IP. Therefore, if you want to view or modify the
configuration of an ATM interface you might need to view three windows as follows:
–
Generic Interface Configuration window
–
ATM Interface Configuration window
–
IP Interface Configuration window
See
for more details.