Cisco 12000/10700 V3.1.1 - Manual (Page 124)

4-10
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Chassis Configuration
The Action Report window (see Figure 4-4 ) informs you whether the performance logging “on” action
was successful or not.
Step 4 Click Close to close the Action Report window.
Stopping Global Performance Logging
Note Performance logging can also be stopped on a per module (GRP) or physical interface
basis. For details on how to stop performance logging for a selected module (GRP), see
“Module Performance” section on page 5-9 . For details on how to stop performance
logging for a selected physical interface (such as Ethernet, ATM, or DS-3), see “Starting
Performance Logging for a Selected Interface” section on page 10-5 .
To stop global performance logging for a selected chassis, proceed as follows:
Step 1 Open the Chassis Configuration window. See “Viewing the Chassis Configuration Window” section on
page 4-7 for further details.
Step 2 Select the relevant Chassis from the list displayed at the left of the window.
Step 3 Click Stop to stop global performance logging for the selected chassis. An Action Report window
appears:
Figure 4-5 Action Report Window
The Action Report window (see Figure 4-5 ) informs you whether the performance logging “off” action
was successful or not.
Step 4 Click Close to close the Action Report window.