Configuring a pos interface – Cisco 12000/10700 V3.1.1 User Manual

Page 218

Advertising
background image

8-16

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 8 Interface Configuration

POS Interface Configuration

Figure 8-6

POS Interface Configuration Window—POS Config Tab

Step 2

Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.

Configuring a POS Interface

To configure a POS Interface, follow these steps:

Step 1

Open the POS Interface Configuration window. See

“Viewing the POS Interface Configuration Window”

section on page 8-15

for further details.

Step 2

Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.

Step 3

Choose Edit > Apply Profile and then choose the profile you wish to apply from the list displayed (if
you are applying a profile). When a profile is applied, the attributes applied from the profile appear in
blue.

Step 4

Configure the parameters displayed in the POS Config tab, as required. See

“POS Interface

Configuration Window—Detailed Description” section on page 8-17

for further details.

Step 5

Click Save to save your configuration changes.

Step 6

Choose File > Close to close the window.

Advertising