Ips status window—detailed description, Ips status, Remote node – Cisco 12000/10700 V3.1.1 User Manual
Page 250: Srp topology map, Viewing the srp topology map
9-20
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
SRP Topology Map
IPS Status Window—Detailed Description
The IPS Status window displays two areas: IPS Status and Remote Node.
IPS Status
Side Wrap Status—Displays the wrap status of the Sides at the node
IPS Wrap Counter—Displays the number of transitions from unwrap to wrap state
Neighbor MAC Address—Displays the neighbor’s MAC address on the ring
IPS Management Request Mode—Displays the current IPS management mode on the side
IPS Active Mode—Displays the currently active IPS mode for the local node
IPS Auto Detect Mode—Displays the current IPS mode that is automatically detected by the local node
IPS Remote Mode—Displays the IPS mode indicated in the IPS messages that are received from the
other nodes on the ring
IPS Remote Type—Displays the type of the IPS Remote mode
Last Wrap Time—Displays the time (in seconds) for the last wrap
Last Unwrap Time—Displays the time (in seconds) for the last unwrap
Remote Node
Host Name—Displays the name of the remote host
IP Address—Displays the IP address of the remote host
Interface—Displays the Interface at the remote host
Connecting Side—Displays the connecting Side at the remote node
SRP Topology Map
The SRP Topology Map covers the following areas:
•
•
SRP Topology Map—Detailed Description
Viewing the SRP Topology Map
To view the SRP Topology map, proceed as follows:
Step 1
Right click a SRP interface object andchoose Cisco 12000/10720 Manager>Fault>SRP>Topology. See
for information on which objects allow you to launch the SRP Topology Map.