Cisco 12000/10700 V3.1.1 - Manual (Page 366)

12-42
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 12 Managing ATM Connections
PVC Status
Characteristics
The Characteristics area is not applicable to Cisco 12000/10720 Router Manager.
OAM Details
The OAM Details area is not applicable to Cisco 12000/10720 Router Manager.
OAM tab
The OAM tab has a single area: Auto Detect Statistics.
Auto Detect Statistics
Displays the state of the OAM cells when the ATM OAM traffic reduction is enabled. Table Table 12-7
on page 12-42 displays the various fields displayed in the Auto Detect Statistics area.
Table 12-7 ATM OAM Auto Detect Statistics
Field Description
Auto Detection Statistics
ATM OAM AUTO DETECT INIT Indicates the number of VCs in the initial ATM_OAM_AUTO_
DETECT_INIT state.
ATM OAM SENDING MONITORING Indicates the number of VCs in the ATM_OAM_SENDING_
MONITORING state. During this state, the peer VC is sending OAM
command loopback cells and the Cisco IOS software is monitoring and also
sending OAM command loopback cells.
ATM OAM MONITORING Indicates the number of VCs in the ATM_OAM_MONITORING state. During
this state, the peer is sending OAM command loopback cells and the Cisco IOS
software is monitoring the cells. This state can also indicate that transmission
of OAM command cells has been switched off.
OAM Loopback Statistics
DownRetry ATM OAM loopback cell DownRetry state.
UpRetry ATM OAM loopback cell UpRetry state.
Verified ATM OAM loopback cells are verified.
Not Verified ATM OAM loopback cells are not verified.