Cisco 12000/10700 V3.1.1 - Manual (Page 408)

14-18
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Status
BGP Status
The BGP Status window displays the BGP configurations existing on the device including basic BGP
information, path information, peer information and redistribution information.
The BGP Status section covers the following:
• Viewing the BGP Status Window
• BGP Status Window—Detailed Description
Viewing the BGP Status Window
To view the BGP Status window, proceed as follows:
Step 1 Right click on the chassis and choose Fault>BGP>BGP Status. See Table 14-1 on page 14-2 for
information on which objects allow you to launch the BGP Status window. The BGP Detail tab displays
the BGP information.
Figure 14-11 BGP Status Window
Step 2 Choose a Chassis from the list box displayed on the left side of the window. Choose the Network tab, if
required. The Network tab displays the information about paths to destination networks from all the
BGP4 Peers.