Add/remove neighbor – Cisco 12000/10700 V3.1.1 User Manual

Page 427

Advertising
background image

14-37

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 14 Routing

BGP Address Family Configuration

Figure 14-24 BGP Address Family—Neighbor Configuration Window

Step 4

Choose the chassis from the Chassis list and the address family from the Address Family List, for which
you want to configure the Neighbor.

Step 5

Edit the fields displayed in the window, as required.

BGP Address Family-Neighbor Configuration—Detailed Description

The Configure Neighbor window displays a list of Address Families and an area: Add/Remove Neighbor.

Address Family List—Displays a list of the address families.

Add/Remove Neighbor

Address Family—Unique identifier of the address family type.

VRF Name—Identifier of the VRF Name if the address family type is IPv4 VRF

Neighbor IP Address—This is used to configure the IP address of the neighbor router for the address
family.

Remote AS—This is used to configure the neighbor router’s autonomous system number. This value can
range from1 to 65535.

Note

This attribute is configurable only for the ipv4 unicast and ipv4 vrf address families.

Advertising