Fault management for mpls traffic engineering, Mpls tunnel information, Viewing the mpls tunnel information window – Cisco 12000/10700 V3.1.1 User Manual

Page 489

Advertising
background image

15-33

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 15 MPLS Management

Fault Management for MPLS Traffic Engineering

Fault Management for MPLS Traffic Engineering

This section describes Fault Management for MPLS traffic engineering (TE).

MPLS Tunnel Information

The MPLS Tunnel Information window displays the status information about the MPLS tunnels
configured on the managed chassis (Cisco 12000 and 10720 Series Routers). The MPLS Tunnel
Information window uses the MPLS-TE-MIB to populate window. This window can be used to find: the
tunnels that exist on a device, the LSPs that originate or transit this device and whether the MPLS entities
are functionally up or down.

The MPLS Tunnel Information section covers the following:

Viewing the MPLS Tunnel Information Window

MPLS Tunnel Information Window—Detailed Description

Viewing the MPLS Tunnel Information Window

To view the MPLS Tunnel Information window, proceed as follows:

Step 1

Right click on an appropriate chassis object and choose Fault> MPLS> MPLS Tunnel Information.
See

Table 15-1 on page 15-3

for information on which objects allow you to launch the MPLS Tunnel

Information window. The MPLS Tunnel Information window appears, with the Select Tunnel tab
displayed.

Advertising