Cisco 12000/10700 V3.1.1 - Manual (Page 527)

16-25
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
BGP Neighbor Tab
The BGP Neighbor tab (see Figure 16-22 ) displays per-interface MPLS/EBGP neighbor information in
a single Interface MPLS/EBGP Neighbor area.
Figure 16-17 VPN Status Window—BGP Neighbor Tab
Interface MPLS/EBGP Neighbor
The Interface MPLS/EBGP Neighbor area displays a table. Each entry in this table specifies a
per-interface MPLS/EBGP neighbor. An entry in this table is created by an LSR for every VRF capable
of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
The Interface MPLS/EBGP Neighbor table displays the following information:
VRF—VRF name responsible for this MPLS/BGP route.
Associated Interface Name—Interface Name to which VRF is associated.
Neighbor Addr—Displays the EBGP neighbor address
Neighbor Type—Displays the address family of the PE address.
Neighbor Role—Displays the role played by this EBGP neighbor with respect to this VRF.
Neighbor Index—Displays a unique tertiary index for an entry in the MPLS/BGP Neighbor Table.
Neighbor Storage Type—The storage type for this entry.