Wa s – Canon EOS Rebel XT User Manual

Page 123

Advertising
background image

123

Preparing to Print

6

Playback the image.

¡

Press the <

x> button.

s

The image will appear and one of
three icons <

w/ A/ S> will appear

on the upper left to indicate that the
camera is connected to the
respective type of printer.

s

The Direct print button lamp will light
in blue.

¡

The procedure will be different
depending on the icon displayed. See
the applicable pages below.

S

Bubble Jet Direct

A

CP Direct

w

PictBridge

Icon

Reference pages

124 - 127, 136

128 - 130, 136

131 - 133, 136

w

A

S

¡

If the camera is running by battery power, make sure it is fully charged.
During direct printing, keep checking the battery level.

¡

If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the <

x> button to playback the image and follow the steps below.

1. Press <

0>.

2. On the print setting screen, select [Print].

The error message will be displayed on the LCD monitor. See “Error

Messages” on page 127.

¡

Before disconnecting the cable, turn off the camera and printer. Pull out
the cable while holding the plug, not the cord.

¡

When connecting the camera to the printer, do not use any cable other
than the dedicated interface cable.

For direct printing, using AC Adapter Kit ACK-DC20 (optional) to power the
camera is recommended.

Advertising
This manual is related to the following products: