Canon EOS Rebel XT User Manual

Page 130

Advertising
background image

A Printing with CP Direct

130

6

Set the trimming.

¡

Set as necessary.

¡

For details on trimming, see page
134.

7

Start printing.

¡

Press the <

V> key to select [Print],

then press <

0>.

s

The printing will start.

¡

When the printing ends, the screen
will return to step 1.

¡

To stop the printing, press <

0> while

[Stop] is displayed, then select [OK]
and press <

0>.

¡

The date may look light if it is imprinted on a bright background or border.

¡

If [Multiple] is selected, [Borders] and [Date] cannot be selected.
[Borderless] will be set and [Date] will be set to [Off]. The image will
also be cut off along all four edges.

¡

If [Date] is [On], the date recorded for the image will appear on the
print.The date will appear on the lower right of the image.

¡

If you select [Stop] while printing only one image, the printing will not
stop until it finishes printing the image. If you are printing multiple
images, the printing will stop after the current image is finished printing.

¡

If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Resume] (after resolving the
problem). If [Resume] is not displayed, select [Stop].

Advertising
This manual is related to the following products: