J self-timer operation – Canon EOS Rebel XT User Manual

Page 48

Advertising
background image

48

Use the self-timer when you want to be in the picture. You can use self-
timer in any Basic Zone mode or Creative Zone mode.

1

Select <

Q>.

¡

Look at the LCD panel and press the
<

iQ> button to select <Q>.

2

Focus the subject.

¡

Look in the viewfinder and press the
shutter button halfway to check that the
focus confirmation light <

o> is on and

the exposure setting is displayed.

3

Take the picture.

¡

Look through the viewfinder and
press the shutter button completely.

s

The beeper will sound, the self-timer
lamp will start blinking, and the shot
will be taken about 10 sec. later.

During the first 8 sec., the beeper
beeps slowly and the lamp blinks slowly.
Then during the final 2 sec., the beeper
beeps faster and the lamp stays lit.

s

During the self-timer operation, the
LCD panel counts down the seconds
until the picture is taken.

j Self-timer Operation

Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.

¡

Use a tripod when you use the self-timer.

¡

To cancel the self-timer after it starts, press the <

iQ> button.

¡

When using the self-timer to shoot only yourself, use focus lock (p.75) for
an object at about the same distance as where you will be.

¡

You can also silence the beeper. (p.50)

Advertising
This manual is related to the following products: