Erica Synths Fusion 6VAC PSU - Manual

Make sure your Erica Fusion 6VAC PSU is configured for
power supply voltage in your country!
It is advised that installation is performed by
person, who has experience working with
220/110V voltages. Before installing the PSU,
make sure your modular system is turned off and discon-
nected from wall power socket.
Follow simple instructions below, and you will not go
wrong with the installation!
ERICA FUSION 6V AC PSU INSTALLATION ERICA FUSION 6V AC PSU
THANK YOU FOR ORDERING
ERICA FUSION MODULE!
The Erica Synths Fusion series modules are designed combin-
ing vacuum tubes and semiconductors therefore they bring
warm, powerful sound and crazy overdrive possibilities of
vacuum tubes into your modular system. Erica Fusion series
consist of whole range of modules used in sound generation
and shaping circuit – pure sine VCO with unique tube wavesh-
aper, VCO signal Mixer, Ringmodulator, VCF, VCA and Analogue
Delay/Chorus. Erica Fusion modules have insignificant (max
15mA) power consumption from eurorack power supply unit
(PSU), but they require separate, easy to install 6VAC PSU for
tube heaters. Erica Fusion 6VAC PSU is designed to power up to
7 Erica Fusion modules and is available from Erica Synths
SHOP or comes for free with purchase of 2 or more Erica Fusion
modules.