Chimney components, Chateau – CFM Corporation DVT38IN User Manual

Page 24

Advertising
background image

24

Chateau™

20011956

Chimney Components

Horizontal Starter Kit

Contains 24”-40” telescopic pipe* for minimum vertical SK8DVSK

rise from collar pipe, 90° elbow, horizontal

through-wall starter pipe, zero clearance sleeve,

metal adhesive tape, stove cement tube, sidewall

termination and firestop.

SK8 Chimney Sections

Pipe used to build 8” (SK8) flue systems.

SK81 (1’ Long)

SK818 (1Z\x’ Long)

SK83 (3’ Long)

SK84 (4’ Long)

SK8 Chimney Elbows

Elbow used to create an offset in an 8”

SK830-2 30° Elbow*

chimney system.

(2 per pkg.)

SK845 45° Elbow*

SK890 90° Elbow*

Firestop

Required at each floor level of chimney

SKFS2A —

installation. (Plus attic on multi-story installation.)

(8” straight flue)

SK8DVFS

(Horizontal Firestop)

Zero Clearance Sleeve

Used when horizontal pipe goes through an interior

SK8ZCS

vertical wall.

Attic Insulation Shield

Used to prevent insulation from coming in contact with AIS-SK

the chimney system.

Chimney Support

Used to support chimney for each of: 30’ vertical

SKCS8

height and 6’ of angled chimney run.

Round Top Termination

Top used to terminate chimney at roof.

(Flashing not included.)

RLTSK8

Round Top Termination -

Top used to terminate chimney at chase.

Extended

(Flashing not included.)

RLTSK8L

Flashing

Metal finishing required around termination

8-6-12 with 8” flue:

to prevent rain leakage.

0-6/12 pitch

8-12-12 with 8” flue:

6/12-12/12 pitch

Housing Extensions

Extends Square Termination on steep

202036

pitched roofs.

Chase Top Housing

Low profile pyramid-style chimney cap used to

PTLSK8

terminate chimney through a chase. Includes

adapter. (Flashing not included.)

Chase Top Housing

Square chimney cap used to terminate chimney

SLTSK8

through a chase. Terra Cotta Masonry. Includes

adapter. (Flashing not included.)

Horizontal Termination

Cap used to terminate venting through a sidewall.

SK8DVRVT

Model Number

Description

Component

NOTE: The 24”-40” telescopic pipe is only intended for use with the SK8DVSK.

* Factory unitized elbow

Advertising
This manual is related to the following products: