Additional required tools and adhesives, Field equipment required, Warning – Hangar 9 Piper J-3 Cub 40 ARF User Manual
Page 4: Using the manual
4
Tools
• Adjustable wrench
• Crimping tool
• Drill
• Drill bit: 1/16”, 5/64”, 3/32”
• Felt-tipped pen
• Heat gun
• Hobby knife
• Hobby scissors
• Petroleum jelly
• Phillips screwdriver (small)
• Phillips screwdriver (large)
• Pliers
• Rotary tool w/sanding drum
• Ruler
• Sandpaper
• String
• Threadlock
• T-pins
Adhesives
• 6-minute epoxy
• Thin CA
• Medium CA
Other Required Items
• Epoxy brushes
• Felt-tipped pen or pencil
• Measuring device (e.g. ruler, tape measure)
• Mixing sticks for epoxy
• Paper towels
• Petroleum jelly
• Rubbing alcohol
• Sanding bar
• Covering Iron (HAN101)
• Covering Glove (HAN150)
• Sealing Iron Sock (HAN141)
An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas,
preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your
radio and engine.
• Propeller
• Fuel
• Glow Plug Wrench (HAN2510)
• Glow Plug Igniter with Charger (HAN7101)
• Glow Plug (HAN3001/3006)
• Manual Fuel Pump (HAN118)
Field Equipment Required
Additional Required Tools and Adhesives
Warning