Chang Yue Industrial KN-8828P - Manual (Page 23)

23
SEGMENT TEMPERATURE
The temperature range for each segment which is available for programming varies, from lowest
in the early segments to highest in later segments. This is refl ected in the “stair step” appearance of the
temperature bars in the LCD display. During the roast, each segment dynamically displays its progress of
the temperature:
The upper portion of each Segment display where the black bars are located represents the range of
programmed temperature this way:
The single bar fl oating above represents the upper range of the programed
temperature of the Segment.
This bar graphically shows how far the temperature has progressed for
that Segment.
Temperature is also displayed in the upper left
corner beneath the total amount of time remaining.
SEGMENT FAN SPEED
This can be Off, and speeds of 1, 2, 3, and 4 , with 4 being the fastest. If the fan is active the fan blades
of the icon in the center will “spin” and the speed will be indicated as shown here:
PROGRAM NAME
With ten different Programs it can be hard to remember which is which. Each
Program can have a name comprised of three alpha-numeric characters. The factory set
Program 0 is called “STD.” You can name the remaining Programs as you wish.
OFF 1 2 3 4
SCREEN COLOR
Depending on what mode or function you have accessed, the LCD screen will change color to alert
you of a change in mode. Some examples are:.
Save a copied
Program
Temperature
change
Delete a
Program
A pause
or alert
Roasting or
ready to roast